Turbo Adapter for Knocki

How to Install and Use the Adapter

Step 1:  Get the the adapter.  It's finally in stock!

Step 2:  Remove the battery cover from your Knocki device.

Step 3:  Remove the batteries.

Step 4:  Ensure the power switch is in the ON position (green). 

Step 4:  Insert the adapter into the battery compartment.

As shown below, you should see a small indicator that reads "POWER SWITCH" overlapping the power switch.

Step 5:  Reinstall the battery door over the flat cable of the adapter as shown below:

Step 6: Plug a powered USB-C cord into the adapter.  The adapter accepts a wide variety of USB C power sources including cell phone and laptop chargers. 

Step 7: As Knocki powers on, it will flash red/orange a few times to indicate that Turbo Mode via USB C is activated. 

That's it!  Enjoy a faster and battery-free Knocki experience.